FRAMED HUD SEVERE

CROTONE KITCHENS combines cutting edge technology with the use of top quality materials. Our plywood kitchen and vanity cabinets meet HUD requirements and are KCMA approved.

This collection is specifically engineered and designed to meet and/or exceed the specifications provided in the << Severe Use HUD >> guide. As with our Craftwood Collection, our KMCA certification guarantees the highest level of quality.

Showroom-worthy kitchens that compliment the finest and most distinctive kitchen furniture and appliances.

CABINET
SPECIFICATIONS

FACE FRAME

  • Kiln dried solid wood.
  • Mortise and tenon, glued and power nailed
  • Rails 3/4″ x 1 3/4″  Styles 3/4″ x 1 3/4″, Mullion 3/4” x 3 1/2

END PANELS

  • 1/2″ phenolic hardwood plywood
  • Ends to be rabbeted to receive tops, bottoms and shelves-glued and stapled into face frame

BACKS

  • 1/4” thick regular hardwood plywood
  • Securely glued and stapled to ends

BASE BOTTOMS

  • 1/2” thick regular hardwood plywood
  • Bottoms let into end panels and face frame
  • Back of floor set on supporting member, glued and fastened

WALL TOP/ BOTTOM

  • 1/2” thick regular hardwood plywood.
  • Top/bottoms let into end panels and face frame, glued and fastened.

INSTALLATION CLEATS

  • Wall cabinets have a 3/4”x3 1/2” solid lumber running full length of cabinet at top and bottom
  • Base cabinets have a 7 1/2” cleat at the top and 3 1/2” cleat at the bottom.

DOOR AND DRAWER FACES

  • 3/4” thick,Phenolic hardwood with no more than one veneered joint on face
  • Overlay type with edges reversed (reverse bevel) to form a continuous finger pull on all sides
  • Edges filled and sanded prior to finishing

FINISH

  • Consisting of stain from standard color selection, sealer and two top coats uv finish

SHELVING

  • 3/4” phenolic hardwood plywood with front edge
  • For wall and base cabinets shelves are let into dadoes of end panels.

DRAWERS

  • Drawer fronts are same material as doors.
  • Sides, backs and fronts are 3/4” thick solid wood
  • Sides are mortised and tennoned into front and back
  • Drawer bottoms are 1/4” hardwood exterior plywood let into sides, front & back components

TOE KICK

  • 3/4”x 4 1/2” pressure treated solid wood
  • Toe kick is inset 3”

HARDWARE

  • Hinges: barrel antique brass fin. standard heavy duty semi-concealed, 1/2”overlay, wrap around, self closing.
  • Drawer slides are epoxy white metal, mounted on the side rails with plastic rear mount brackets having 75 lbs load capacity.
  • Bumper pads are white foam (or brown felt).

CONTACT US

Schedule a meeting with one of our experts to get a free quote today!